Thermal conductivity measurement of uranium-plutonium mixed oxide doped with Nd/Sm as simulated fission products

Horii, Yuta; Hirooka, Shun; Uno, Hiroki*; Ogasawara, Masahiro*; Tamura, Tetsuya*; Yamada, Tadahisa*; Furusawa, Naoya*; Murakami, Tatsutoshi; Kato, Masato

Journal of Nuclear Materials, 588, p.154799_1 - 154799_20, 2024/01

https://doi.org/10.1016/j.jnucmat.2023.154799

The thermal conductivities of near-stoichiometric (U,Pu,Am)O doped with NdO/SmO, which is major fission product (FP) generated by a uranium-plutonium mixed oxides (MOX) fuel irradiation, as simulated fission products are evaluated at 1073-1673 K. The thermal conductivities are calculated from the thermal diffusivities that are measured using the laser flash method. To evaluate the thermal conductivity from a homogeneity viewpoint of Nd/Sm cations in MOX, the specimens with different homogeneity of Nd/Sm are prepared using two kinds of powder made by ball-mill and fusion methods. A homogeneous Nd/Sm distribution decreases the thermal conductivity of MOX with increasing Nd/Sm content, whereas heterogeneous Nd/Sm has no influence. The effect of Nd/Sm on the thermal conductivity is studied using the classical phonon transport model (A+BT). The dependences of the coefficients A and B on the Nd/Sm content (C and C, respectively) are evaluated as: A(mK/W)=1.70 10 + 0.93C + 1.20C, B(m/W)=2.39 10.

Basic research on the stability of fuel debris including alloy phase (Contract research); FY2020 Nuclear Energy Science & Technology and Human Resource Development Project

Collaborative Laboratories for Advanced Decommissioning Science; Tohoku University*

JAEA-Review 2022-009, 73 Pages, 2022/06

JAEA-Review-2022-009.pdf:2.08MB

The Collaborative Laboratories for Advanced Decommissioning Science (CLADS), Japan Atomic Energy Agency (JAEA), had been conducting the Nuclear Energy Science & Technology and Human Resource Development Project (hereafter referred to "the Project") in FY2020. The Project aims to contribute to solving problems in the nuclear energy field represented by the decommissioning of the Fukushima Daiichi Nuclear Power Station, Tokyo Electric Power Company Holdings, Inc. (TEPCO). For this purpose, intelligence was collected from all over the world, and basic research and human resource development were promoted by closely integrating/collaborating knowledge and experiences in various fields beyond the barrier of conventional organizations and research fields. The sponsor of the Project was moved from the Ministry of Education, Culture, Sports, Science and Technology to JAEA since the newly adopted proposals in FY2018. On this occasion, JAEA constructed a new research system where JAEA-academia collaboration is reinforced and medium-to-long term research/development and human resource development contributing to the decommissioning are stably and consecutively implemented. Among the adopted proposals in FY2018, this report summarizes the research results of the "Basic research on the stability of fuel debris including alloy phase" conducted from FY2018 to FY2021 (this contract was extended to FY2021). Since the final year of this proposal was FY2021, the results for four fiscal years were summarized. The present study focus on fuel debris consisting of oxide phase and alloy phase generated by the high temperature chemical reaction between structure materials (SUS pipes, pressure vessels, etc.) and fuels (melted fuels, claddings components, etc.). We synthesize the simulated debris of UO-SUS system and UO-Zr(ZrO)-SUS system by high-temperature heat treatment, and measure their chemical property and dissolution behavior in water.

Evaluation of the minimum critical amount for heterogeneous lattice systems composed of fuel rods utilized in low-power water-moderated research and test reactors by using continuous-energy Monte Carlo code MVP with JENDL-4.0

Yanagisawa, Hiroshi

JAEA-Technology 2021-023, 190 Pages, 2021/11

JAEA-Technology-2021-023.pdf:5.25MB

Computational analyses on nuclear criticality characteristics were carried out for heterogeneous lattice systems composed of water moderator and fuel rods utilized in low-power research and test reactors, in which the depletion of fuel due to burnup is relatively small, by using the continuous-energy Monte Carlo code MVP Version 2 with the evaluated nuclear data library JENDL-4.0. In the analyses, the minimum critical number of fuel rods was evaluated using calculated neutron multiplication factors for the heterogeneous systems of the uranium dioxide fuel rod in the Static Experiments Critical Facility (STACY) and the Tank-type Critical Assembly (TCA), and the uranium-zirconium hydride fuel rod in the Nuclear Safety Research Reactor (NSRR). In addition, six sorts of the ratio of reaction rates, which are components of neutron multiplication factors, were calculated in the analyses to explain the variation of neutron multiplication factors with the ratio of water moderator to fuel volume in a unit fuel rod cell. Those results of analyses are considered to be useful for the confirmation of reasonableness and validity of criticality safety measures as data showing criticality characteristics for water-moderated heterogeneous lattice systems composed of the existing fuel rods in research and test reactors, of which criticality data are not sufficiently provided by the Criticality Safety Handbook.

Fission gas release from irradiated mixed-oxide fuel pellet during simulated reactivity-initiated accident conditions; Results of BZ-3 and BZ-4 tests

Kakiuchi, Kazuo; Udagawa, Yutaka; Amaya, Masaki

Annals of Nuclear Energy, 155, p.108171_1 - 108171_11, 2021/06

https://doi.org/10.1016/j.anucene.2021.108171

Effect of nitrogen oxides on decomposition behavior of gaseous ruthenium tetroxide

Yoshida, Naoki; Amano, Yuki; Ono, Takuya; Yoshida, Ryoichiro; Abe, Hitoshi

JAEA-Research 2020-014, 33 Pages, 2020/12

JAEA-Research-2020-014.pdf:3.66MB

Considering the boiling and drying accident of high-level liquid waste in fuel reprocessing plant, Ruthenium (Ru) is an important element. It is because Ru would form volatile compounds such as ruthenium tetroxide (RuO) and could be released into the environment with other coexisting gasses such as nitric oxides (NOx) such as nitric oxide (NO) and nitrogen dioxide (NO). To contribute to the safety evaluation of this accident, we experimentally evaluated the effect of NOx on the decomposition and chemical change behavior of the gaseous RuO (RuO(g)). As a result, the RuO(g) decomposed over time under the atmospheric gasses with NO or NO, however, the decomposition rate was slower than the results of experiments without NOx. These results showed that the NOx stabilized RuO(g).

Basic research on the stability of fuel debris including alloy phase (Contract research); FY2018 Center of World Intelligence Project for Nuclear Science/Technology and Human Resource Development

Collaborative Laboratories for Advanced Decommissioning Science; Tohoku University*

JAEA-Review 2019-035, 61 Pages, 2020/03

JAEA-Review-2019-035.pdf:2.9MB

JAEA/CLADS, had been conducting the Center of World Intelligence Project for Nuclear Science/Technology and Human Resource Development (hereafter referred to "the Project") in FY2018. The Project aims to contribute to solving problems in nuclear energy field represented by the decommissioning of the Fukushima Daiichi Nuclear Power Station, Tokyo Electric Power Company Holdings, Inc. For this purpose, intelligence was collected from all over the world, and basic research and human resource development were promoted by closely integrating/collaborating knowledge and experiences in various fields beyond the barrier of conventional organizations and research fields. The sponsor of the Project was moved from the Ministry of Education, Culture, Sports, Science and Technology to JAEA since the newly adopted proposals in FY2018. On this occasion, JAEA constructed a new research system where JAEA-academia collaboration is reinforced and medium-to-long term research/development and human resource development contributing to the decommissioning are stably and consecutively implemented. Among the adopted proposals in FY2018, this report summarizes the research results of the "Basic Research on the Stability of Fuel Debris Including Alloy Phase". In the present study, we focus on fuel debris consisting of oxide phase and alloy phase generated by the high-temperature chemical reaction between structure materials (SUS pipes, pressure vessels, etc.) and fuels (melted fuels, claddings components, etc.). We synthesize the simulated debris of UO-SUS system and UO-Zr(ZrO)-SUS system by high-temperature heat treatment, and measure their chemical property and dissolution behavior in water. Also, we will conduct research and development to spectroscopically analyze secular changes of oxide phase and alloy phase in the simulated debris.

Coupled computer code study on irradiation performance of a fast reactor mixed oxide fuel element with an emphasis on the fission product cesium behavior

Uwaba, Tomoyuki; Nemoto, Junichi*; Ishitani, Ikuo*; Ito, Masahiro*

Nuclear Engineering and Design, 331, p.186 - 193, 2018/05

https://doi.org/10.1016/j.nucengdes.2018.03.005

A computer code for the analysis of the overall irradiation performance of a fast reactor mixed-oxide (MOX) fuel element was coupled with a specialized code for the analysis of fission product cesium behaviors in a MOX fuel element. The coupled code system allowed for the analysis of the radial and axial Cs migrations, the generation of Cs chemical compounds and fuel swelling due to Cs-fuel-reactions in association with the thermal and mechanical behaviors of the fuel element. The coupled code analysis was applied to the irradiation performance of a fast reactor MOX fuel element attaining high burnup for discussion on the axial distribution of Cs, fuel-to-cladding mechanical interaction owing to the Cs-fuel-reactions by comparing the calculated results with post irradiation examinations.

FEMAXI-7 prediction of the behavior of BWR-type accident tolerant fuel rod with FeCrAl-ODS steel cladding in normal condition

Yamaji, Akifumi*; Yamasaki, Daiki*; Okada, Tomoya*; Sakamoto, Kan*; Yamashita, Shinichiro

Proceedings of 2017 Water Reactor Fuel Performance Meeting (WRFPM 2017) (USB Flash Drive), 10 Pages, 2017/09

http://www.wrfpm2017.org/upload/draft_file/F-043-PD4.pdf

Features of the accident tolerant fuel performance were evaluated with FEMAXI-7 when the current Zircaloy(Zry) cladding is replaced with FeCrAl-ODS steel cladding (a type of oxide dispersion strengthened steel being developed under the Project on Development of Technical Basis for Safety Improvement at Nuclear Power Plants by Ministry of Economy, Trade and Industry (METI) of Japan) for BWR 99 type fuel rod. In particular, influences of the creep strain rate and thickness of the ODS cladding on the fuel temperature, fission gas release rate (FGR) and pellet-cladding mechanical interaction (PCMI) are investigated.

Chlorination of UO and (U,Zr)O solid solution using MoCl

Sato, Takumi; Shibata, Hiroki; Hayashi, Hirokazu; Takano, Masahide; Kurata, Masaki

Journal of Nuclear Science and Technology, 52(10), p.1253 - 1258, 2015/10

https://doi.org/10.1080/00223131.2015.1070110

In order to explore the applicability of the chlorination by MoCl as a potential pretreatment technique for waste treatment of fuel debris by pyrochemical methods, chlorination experiments of UO and (UZr)O simulated fuel debris were carried out in two steps: the first one is a chlorination reaction by homogeneous heating, the second one is a volatilization of molybdenum by-product by heating under temperature gradient condition. Most of UO and (UZr)O powder were converted to UCl or UCl and ZrCl mixture at 573 K, respectively. In the case of (UZr)Osintered particle, most of sample was converted to the chlorides because the products evaporated and be separated from sample surface at 773 K, while only the surface of the sample disk was converted to the chlorides at 573 and 673 K. Most of molybdenum by-product and ZrCl were separated from UCl by volatilization at 573 K.

Effect of oxide film formed during -ray irradiation on pitting corrosion of fuel cladding in water containing sea salt

Motooka, Takafumi; Tsukada, Takashi

Proceedings of 2014 Nuclear Plant Chemistry Conference (NPC 2014) (USB Flash Drive), 9 Pages, 2014/10

In Fukushima Daiichi Nuclear Power Station (1F), seawater was injected into spent fuel pools in March 2011. Zircaloy-2 is adopted for the fuel cladding at 1F. Zirconium alloys including Zircaloy-2 are susceptible to pitting corrosion in oxidizing chloride solutions. In this study, we investigated the effect of oxide film formed during -ray irradiation on pitting corrosion of fuel cladding in water containing sea salt. The pitting potentials of Zircaloy-2 were measured using the water containing artificial sea salt. Changes in the composition of water containing sea salt were analyzed before and after -ray irradiation. The characteristics of the oxide films formed on Zircaloy-2 were evaluated by X-ray photoelectron spectroscopy. Solution analyses for water containing sea salt showed that hydrogen peroxide was generated by the irradiation. The pitting potential of Ziracloy-2 with oxide film formed under -ray irradiation was higher than that with oxide film formed without irradiation. X-ray photoelectron spectroscopy indicated that the oxide film was composed of zirconium oxide and the growth of oxide film was enhanced during the irradiation. It could thus be explained that the enhanced growth of oxide film under -ray irradiation caused the higher pitting potential.